Manual Cantilever gate
The gate is opened and closed by hand, and locked using a euro cylinder type lockinox lock and key.
Dead Man Cantilever gate
The gate is powered by an electric three phase motor which operates via a dead mans switch i.e. a key in inserted and turned towards desired directions of movement. Once the hand is removed from the key the gate stops dead.
Automated Cantilever gate
Powered by an electric three phase motor, which opens and closes without supervision. This option can be controlled using various access control systems i.e. card swipes, remote control key fobs, ground loops, coded key pads, intercom systems, camera intercom systems, iris readers and finger print readers. The gate opens to allow entry and closes automatically after a pre-set time (e.g. 20 seconds). For safety reasons all automated gates must have safety edges on both the gate leaf end and on the fate support post. An infra-red beam is also required for additional pedestrian and vehicle protection. If at any time during the closing of the gate either the infra-red beam of the safety edges sense an obstruction in the gateway, the gate will stop and re-open, and after a pre-set time re-close.